MPC4 200-510-071-113 Katin Kariyar Injin
Gabaɗaya bayanai
| Kerawa | Sauran |
| Abu Na'a | MPC4 |
| Lambar labarin | 200-510-071-113 |
| Jerin | Jijjiga |
| Asalin | Amurka (Amurka) |
| Girma | 85*140*120(mm) |
| Nauyi | 0.6kg |
| Lambar Tarifu na Kwastam | 85389091 |
| Nau'in | Katin Kariyar Injiniya |
Cikakkun bayanai
MPC4 200-510-071-113 Katin Kariyar Injin
Abubuwan shigar da sigina masu ƙarfi suna da cikakkun shirye-shirye kuma suna iya karɓar sigina masu wakiltar hanzari, gudu da ƙaura (kusanci), da sauransu. A kan-jirgin multichannel aiki yana ba da damar auna ma'auni na jiki daban-daban, gami da dangi da cikakkar girgiza, Smax, eccentricity, matsawa matsayi, cikakkiyar haɓakar gidaje daban-daban, ƙaura da matsa lamba mai ƙarfi.
Ayyukan dijital sun haɗa da tacewa na dijital, haɗin kai ko bambanta (idan an buƙata), gyarawa (RMS, ƙimar ma'ana, kololuwar gaskiya ko ganiya-zuwa ganiya), bin diddigin tsari (girma da lokaci) da auna gibin firikwensin-manufa.
Abubuwan shigar da sauri (tachometer) suna karɓar sigina daga na'urori masu auna gudu iri-iri, gami da tsarin da ya danganci binciken kusanci, firikwensin bugun bugun jini ko siginonin TTL. Hakanan ana samun goyan bayan ƙimar tachometer juzu'i.
Ana iya bayyana tsarin a cikin awo ko na masarautu. Saitunan faɗakarwa da haɗarin haɗari suna da cikakkun shirye-shirye, kamar jinkirin lokacin ƙararrawa, ƙanƙara da latching. Hakanan ana iya daidaita matakan Faɗakarwa da Haɗari azaman aikin gudu ko kowane bayanin waje.
Ana samun fitarwa na dijital a ciki (akan madaidaicin shigar da katin fitarwa na IOC4T) don kowane matakin ƙararrawa. Waɗannan sigina na ƙararrawa na iya fitar da relays na gida guda huɗu akan katin IOC4T da/ko ana iya tura su ta amfani da bas ɗin Raw na VM600 ko Buɗaɗɗen Tara (OC) don fitar da relays akan katunan relay na zaɓi kamar RLC16 ko IRC4.
Ana samun sigina mai ƙarfi (vibration) da aka sarrafa da sigina na sauri a bayan taragon (akan gaban panel na IOC4T) azaman siginar fitarwa ta analog. Ana ba da sigina na tushen ƙarfin lantarki (0 zuwa 10 V) da na tushen yanzu (4 zuwa 20 mA).
MPC4 tana yin gwajin kai da bincike na yau da kullun akan haɓakawa. Bugu da kari, katin da aka gina a cikin "Ok tsarin" yana ci gaba da lura da matakin sigina da aka samar ta hanyar auna sigina (sensor da/ko siginar kwandishan) kuma yana nuna kowace matsala saboda karyar layin watsawa, firikwensin kuskure ko kwandishan sigina.
Ana samun katin MPC4 a cikin nau'ikan daban-daban, gami da "misali", "wasu kewayawa" da "lafiya" (SIL). Bugu da ƙari, ana samun wasu nau'ikan tare da sutura mai kama da juna da aka yi amfani da su a kewayen katin don ƙarin kariyar muhalli daga sinadarai, ƙura, danshi da matsanancin zafin jiki.
